PM NAGEL­DICHTUNGSBAND (NAIL-SEALING TAPE)

Go back

PM NAGEL­DICHTUNGSBAND (NAIL-SEALING TAPE)

Accessories

Single-sided adhesive, PE foam nail sealing strip on a roll with a high-quality, synthetic rubber bonding adhesive – for secure­ly sealing nail or screw feed-through openings.

The closed-cell polyethylene foam offers good resilience, good resistance to ageing and is biologically harmless.

The high-quality adhesive with high initial adhesion provides a secure bond on the underlay membrane or counter battens, even at low temperatures.

The PM NAIL SEALING STRIP stands out for its excellent resist­ance to ageing.

Carrier material Polyethylene foam, physically cross-linked, closed cell
Adhesive Synthetic rubber bonding adhesive
anthracite
Colour anthracite
Temperature resistance -30 °C to +80 °C
Processing temperature +5 °C to +40 °C
Thickness approx. 3 mm
Width 60 mm
m/roll 30
Rolls/package 20
Water absorption (ISO 2896) ≤ 1 vol %
Density (ISO 845) 25 kg/m³
Compression hardness (ISO 844) at 25 % 35 kPa
at 50 % 100 kPa
Water resistance Permanently water-resistant
Not resistant to oils, organic solvents, e.g. petrol
Storage dry and UV-protected at +5 °C to +25 °C

Go back

Related accessories

PM 8N

PM 8N dimpled sheet with 8 mm dimples is a cost-effective solution for protecting perimeter insulation – on pressure-stable waterproofing.

PM LDPE FOLIEN (FOILS)

PM LDPE FOLIEN offer optimal long-term protection for your products. They display impressive versatility and are equally suitable for professionals and DIY enthusiasts.

PM 8N

PM 8N dimpled sheet with 8 mm high dimples is the cost-effective solution as a subbase and an inexpensive alternative to lean concrete.

PM STANDARD GS

PM STANDARD GS dimpled sheet with 8 mm dimples is a high-quality solution for protecting perimeter insulation, and on pressure-stable waterproofing.

PM XS

PM XS is an effective protection and drainage system for horizontal indoor applications. PM XS consists of a high-quality, very flat HDPE dimpled sheet.

PM MAXIM-TEC

PM MAXIM-TEC is the isotropic, durable premium PU roofing underlay with seam bonding via 2 adhesive strips.

PM SOLID-TEC

PM SOLID-TEC is the universal sarking and facade membrane with double-sided adhesive.

PM STANDARD GS

PM STANDARD GS dimpled sheet with 8 mm dimples is the high-quality solution for a subbase, and also offers protection against rising soil moisture.

PM STANDARD GS

PM STANDARD GS dimpled sheet with 8 mm high dimples is the problem solution for tunnel constructions with less water.

PM 20

PM 20 is a high-performance dimpled sheet with 20 mm-high dimples, and the ideal solution for draining rising, seeping and backwater in tunnel constructions.

PM 20

PM 20 is a high-performance dimpled sheet, and the ideal solution for draining rising, seeping and backwater in double-shell constructions.

PM LDPE MAUERWERKSPERRE (DAMP-PROOF COURSE)

PM LDPE MAUERWERKSSPERRE is a single-layer 0.35 mm thick bitumen-compatible damp-proof course for single-layer wall constructions.

PM PVC MAUERWERKSSPERRE (DAMP-PROOF COURSE)

PM PVC MAUERWERKSSPERRE is a single-layer, 1.2 mm thick, DIN-compliant, elastic and embossed damp-proof course for single and cavity wall constructions.

PM BituV MAUERWERKSSPERRE (DAMP-PROOF COURSE)

PM BituV MAUERWERKSSPERRE is a three-layer, 1.2 mm thick, DIN-compatible, fleece-laminated, bitumen-compatible damp-proof course for single and cavity wall constructions and as an L- or Z- shaped barrier in cavity wall structures.

PM THENE-TEC

PM THENE-TEC is the combination of a cross-laminated Valeron film and a sealing adhesive layer made of special bitumen rubber.

PM GEO-TEC

PM GEO-TEC is a three-layer, high-quality protection and drainage system for polymer-modified bitumen thick coating (PMBC) on basement walls.

PM GEO-TEC-ECOnopp®

PM GEO-TEC-ECOnopp® is a particularly environmentally friendly, three-layer, high-quality protection and drainage system for the polymer-modified bitumen coating (PMBC) on basement walls.

PM 3SG-GEOTEX

PM 3SG-GEOTEX is a proven three-layer addition as a protection and drainage system for the polymer-modified bitumen coating (PMBC) on basement walls.

PM 3SW-GEOTEX

PM 3SW-GEOTEX is a cost-effective three-layer addition as a protection and drainage system for the polymer-modified bitumen coating (PMBC) on basement walls.

PM XS-3-GEOTEX

The three-layer PM XS-3-GEOTEX protection and drainage system is a high-quality, particularly flat addition to the polymer-modified bitumen coating PMBC for basement walls.

PM DRAIN-TEC

PM DRAIN-TEC is a high-quality protection and drainage system as well as the universal solution for vertical surface drainage on all pressure-stable substrates.

PM DRAIN-TEC

PM DRAIN-TEC is a high-quality protection and drainage system as well as the universal solution for horizontal surface drainage on all pressure-stable substrates.

PM DRAIN-TEC

PM DRAIN-TEC is a high-quality protection and drainage system as well as the universal solution for horizontal surface drainage for green roofs.

PM P-STANDARD GS

PM P-STANDARD GS is a water-storing perforated dimpled membrane and is the ideal solution for extensive green roofs.

PM P-STANDARD GS-GEOTEX

PM P-STANDARD GS-GEOTEX is a water-storing drainage membrane and is the ideal solution for extensive green roofs.

PM P-20

PM P-20 is a water-storing, perforated special knobbed membrane and is the ideal solution for extensive and intensive green roofs. In the green roof, it takes on the function of a protective and water storage layer.

PM P-20-GEOTEX

PM P-20-GEOTEX is a water-storing drainage membrane with an integrated geotextile and is considered the ideal solution for extensive and intensive green roofs. In the green roof, it takes on the function of a protective, filter, seepage and water-storage layer.

PM P-40

PM P-40 is a water-storing, perforated dimpled sheet in plate form for intensive green roofs. It offers a multiple of drainage and water storage capacity.

PM P-60

PM P-60 is a water-storing, perforated dimpled sheet in plate form for intensive green roofs. It offers an extended drainage and water-storage capacity. In the green roof, it takes on the function of an extremely powerful water-storage layer.

PM DRAIN-TEC-ECOnopp®

PM DRAIN-TEC-ECOnopp® is a particularly environmentally friendly protection and drainage system as well as the universal solution for vertical surface drainage on all pressure-stable substrates.

PM DRAIN-TEC-ECOnopp®

PM DRAIN-TEC-ECOnopp® is a particularly environmentally friendly protection and drainage system as well as a universal solution for horizontal surface drainage on all pressure-stable substrates.

PM 2SG-GEOTEX

PM 2SG-GEOTEX is a proven protection and drainage system as well as a solution for horizontal surface drainage with lower requirements.

PM 2SW-GEOTEX

PM 2SW-GEOTEX is a proven protection and drainage system as well as a solution for horizontal surface drainage with lower requirements.

PM 2SG-GEOTEX

PM 2SG-GEOTEX is a proven protection and drainage system as well as a solution for vertical surface drainage with lower requirements.

PM 2SW-GEOTEX

PM 2SW-GEOTEX is an inexpensive protection and drainage system as well as a solution for vertical surface drainage.

PM XS-2-GEOTEX

PM XS-2-GEOTEX is a flat, effective protection and drainage system and a universal solution for horizontal surface drainage on all pressure-stable substrates.

PM 20-GEOTEX

PM 20-GEOTEX is a high-performance drainage system with a height of 20 mm as a special solution for a particularly powerful horizontal surface drainage on all pressure-stable substrates.

PM 20-GEOTEX

PM 20-GEOTEX is a high-performance drainage system with a height of 20 mm, and a special solution for particularly powerful vertical surface drainage on all pressure-stable substrates.

PM RANDABSCHLUSS­PROFIL (EDGE PROFILE)

PM RANDABSCHLUSS­PROFIL in metal or plastic. A practical edge trim profile as the top finish for dimpled and drainage sheets.

PM MONTAGEKNÖPFE MIT STAHLNÄGELN (ASSEMBLY BUTTONS WITH STEEL NAILS)

PM MONTAGEKNÖPFE with hardened steel nails. Steel nails with assembly buttons for the rational fastening of dimpled and drainage sheets to concrete and masonry.

PM PROFI BAND (PRO TAPE)

PM PROFI BAND is a special adhesive tape and is used to bond PMI roofing underlays, common underlays as well as facade membranes with covered surfaces outdoors. The PMI PROFI BAND is also used to bond the PM LDPE DAMPFBREMSFOLIE (VAPOR BARRIER SHEET) and to bond other LDPE foils.

PM NAGEL­DICHTUNGSBAND (NAIL-SEALING TAPE)

PM NAGEL­DICHTUNGSBAND is a one-sided adhesive, PE foam nail sealing tape for the secure sealing of nail or screw penetrations.

PM POWER FIX

PM POWER FIX high-performance adhesive is a permanently elastic adhesive for gluing and connecting PMI DPC, PMI dimpled and drainage sheets and PMI roofing membranes.

PM BUTYLKLEBEBAND (BUTYL ADHESIVE TAPE)

PM BUTYL ADHESIVE TAPE, 20 mm wide. Waterproof butyl rubber compound with strong adhesive on both sides for sealing and bonding wind and vapor barriers, underlay membranes, dimpled and drainage membranes as well as DPC.

PPM REPAIR TAPE AL

PM REPAIR TAPE AL consists of an aluminium PET composite film and a sticky bitumen rubber layer and serves as a self-adhesive and cold-processed sealing and repair tape.

PM DACHROLLFLEX AL-G (ROOF ROLL FLEX AL-G)

PM DACHROLLFLEX AL-G is the optimal embossed solution when it comes to sealing at all typical connection points in the roof area.

PM DACHROLLFLEX AL-P (ROOF ROLL FLEX AL-P)

PM DACHROLLFLEX AL-P, is a highly tear-resistant, pleated aluminum connecting tape, and always the optimal solution when it comes to fitting different roof coverings.

PM DACHROLLFLEX AL-3D (ROOF ROLL FLEX AL-3D)

PM DACHROLLFLEX AL-3D is the optimal three-dimensional solution when it comes to complex sealing at typical connection points in the roof area.

PM FIRST- AND GRAT-ROLLE STANDARD (STANDARD RIDGE AND ARRIS ROLLS)

PM FIRST- UND GRAT-ROLLE STANDARD is a simple and quick solution for all pitched roof constructions and complies with the requirements of DIN 4108 part 3. Thanks to the special structure of the PP fabric, the free ventilation cross section even far exceeds DIN 4108 Part 3.

PM LDPE DAMPFBREMSFOLIE

Vapour barrier made of special polyethylene for all pitched roof and wooden skeleton constructions. Sd value> 100 m.

PM FIRST- AND GRAT-ROLLE PREMIUM (PREMIUM RIDGE AND ARRIS ROLLS)

PM FIRST- UND GRAT-ROLLE PREMIUM is a high-quality and quick solution for the safe ventilation of the pitched roof, and serves to prevent moisture-related damage, and to permanently ventilate the roof covering.

PM FIRST- AND GRAT-ROLLE PREMIUM DUO (PREMIUM DUO RIDGE AND ARRIS ROLLS)

PM FIRST- AND GRAT-ROLLE PREMIUM DUO is a very high-quality solution for the safe ventilation of the roof. It corresponds to the regulations of the German roofing trade and even exceeds the requirements of DIN 4108 Part 3.

PM MAUERWERKSECKEN

High-quality moulded parts made of homogeneous, highly flexible, premium-quality EPDM. For easily manufacturing perfect custom-fit and waterproof 90° inside and outside corners – in particular L or Z barriers in cavity walls.