PM DRAIN-TEC

Go back

PM DRAIN-TEC

Drainage membrane

PM DRAIN-TEC is an effective protection and drainage system and the universal solution for both horizontal and vertical surface drainage on all pressure-resistant surfaces. PM DRAIN-TEC consists of a dimpled membrane and a sturdy geotextile. The smooth back side allows for a uniform and extensive load distribution on the sealing. This double-layer system protects the waterproofing below it from mechanical damage and damaging thermal stresses.

PM DRAIN-TEC has a compressive strength of 400 kN/m². The drainage membrane is available in many different length and width variations. The excellent water draining capacity is multiple times higher than required by drainage standard DIN 4095.

PM DRAIN-TEC protects the outer walls of basements against waterlogging. The moisture penetrates the geotextile and enters the ducts of the dimpled membrane, where it is securely drained. In the process, the geotextile acts as a filter and prevents the ducts from getting clogged up. The optimal high-performance geotextile boasts very high initial strength and is subject to only minimum deformation under increasing working load.

Dimpled membrane HDPE
Geotextile polypropylene
Dimple height 8 mm
Total weight approx. 800 g/m²
Number of dimples 1.710 dimples/m²
Compressive strength approx. 400 kN/m² = 40 t/m²
Colour black
Water flow capacity in the plane approx. 2,62 l/s·m at 20 kPa rigid/soft
Roll length 12,5 / 15 / 20 m
Roll width 0,5 / 0,75 / 1,0 / 1,5 / 2,0 / 2,5 m
Air volume between the dimples approx. 5,5 l/m²
Temperature resistance –30 °C to +80 °C
Chemical properties chemical-resistant
Physiological properties safe for drinking water
Characteristic opening width approx. 170 μm
Water permeability
EN ISO 11058
approx. 100 · 10-3 m/s

This product is also available with a compressive strength of 250 kN/m².

Go back

Related accessories

PM MONTAGEDÜBEL (PM MOUNTING SCREW)

PM Mounting Screw is used to fasten dimpled and drainage membranes to perimeter insulation made of pressure-resistant XPS insulation material.

PM RANDABSCHLUSS­PROFIL (EDGE PROFILE)

PM RANDABSCHLUSS­PROFIL in metal or plastic. A practical edge trim profile as the top finish for dimpled and drainage sheets.

PM MONTAGEKNÖPFE MIT STAHLNÄGELN (ASSEMBLY BUTTONS WITH STEEL NAILS)

PM MONTAGEKNÖPFE with hardened steel nails. Steel nails with assembly buttons for the rational fastening of dimpled and drainage sheets to concrete and masonry.

PM POWER FIX

PM POWER FIX high-performance adhesive is a permanently elastic adhesive for gluing and connecting PMI DPC, PMI dimpled and drainage sheets and PMI roofing membranes.

PM BUTYLKLEBEBAND (BUTYL ADHESIVE TAPE)

PM BUTYL ADHESIVE TAPE, 20 mm wide. Waterproof butyl rubber compound with strong adhesive on both sides for sealing and bonding wind and vapor barriers, underlay membranes, dimpled and drainage membranes as well as DPC.